Information about Engine Oil

Viscosity and Viscosity Index (VI).

The proper viscosity is the single most important criteria of a lubricating oil. The basic performance of machinery is based on the viscosity of the lubricant. Viscosity is, if you like, the resistance to the flowability of the oil. The thicker an oil, the higher its viscosity. The chart on the right shows a rough guide to ambient temperatures vs oil viscosity performance in both multigrade (top half) and single grade (lower half) oils.
Multigrade oils work by having a polymer added to a light base oil which prevents the oil from thinning too much as it warms up. At low temperatures, the polymers are coiled up and allow the oil to flow as it's low number (W number) indicates. As the oil heats up, the polymers unwind into long chains which prevent the oil from thinning as much as it normally would. The result is that at 100°C, the oil has thinned only as much as it's higher rating. Think of it like this: a 10W30 oil is a 10-weight oil that will not thin more than a 30-weight oil when it gets hot.
The viscosity index of a lubricant is an empirical formula that allows the change in viscosity in the presence of heat to be calculated. This tells the user how much the oil will thin when it is subjected to heat. The higher the viscosity index, the less an oil will thin at a specified temperature. Multi-viscosity motor oils will have a viscosity index well over 100, while single viscosity motor oils and most industrial oils will have a VI of about 100 or less.

A quick guide to the different grades of oil.

Fully Synthetic	Characteristics
0W-30 0W-40 5W-40	Fuel economy savings Enhances engine performance and power Ensures engine is protected from wear and deposit build-up Ensures good cold starting and quick circulation in freezing temperatures Gets to moving parts of the engine quickly
Semi-synthetic	Characteristics
5W-30 10W-40 15W-40	Better protection Good protection within the first 10 minutes after starting out Roughly three times better at reducing engine wear Increased oil change intervals - don't need to change it quite so often
Mineral	Characteristics
10W-40 15W-40	Basic protection for a variety of engines Oil needs to be changed more often

Engine Oil Shelf Life.

Product	Shelf Life
Base Oils, Process Oils	3 years
Hydraulic Oils, Compressor Oils, General Purpose Lubricating Oils	2 years
Engine Oils and Transmission Oils	3 years
Industrial and Automotive Gear Oils	2 years
Metal Working and Cutting Oils	1 year